Privacy and Wind Protection Netting
Privacy netting and wind protection netting perform two tasks in one textile mesh: the net restricts sightlines, reduces wind across open areas, and still lets air flow through the meshes. The category includes green HDPE nets, cut-to-size fabric, large rolls for long fences, and PE construction fence tarpaulins for black, white, and green framed site enclosures.
Choosing the right privacy net
A privacy net works best when its width, length, and material suit the existing structure. Narrow fabric is often enough for low garden and balcony fences. Taller fences, terrace sides, or sports areas need more height or a longer run. This category contains nets 1 m, 1.2 m, 1.5 m, 1.8 m, and 2 m wide, with piece lengths from a few metres to 50 m.
Narrow widths
Fabric from 1 m wide suits railings, low fence panels, and side boundaries. One 1 m version comes as a 50 m roll, another as 25 m fabric. Both are green knitted HDPE.
Medium heights
Widths of 1.2 m and 1.5 m cover standard fence heights more effectively. Options include compact 14 m pieces, 10 m sets with cable ties named in the product title, and 50 m rolls for several fence panels.
Large areas
For continuous privacy lines, 1.8 m and 2 m nets are practical. They are available in 25 m and 50 m versions and reduce the number of joints on long runs.
Comparing material values clearly
Several nets are described as knitted HDPE fabric weighing 150 g/m². For a 1.8 x 50 m model, the stated tensile strength is 440 N/5 cm warp and 750 N/5 cm weft, with tear resistance of 120 N. The same product card lists temperature resistance from minus 40 to plus 80 °C, UV stability of 300 kLy, a shading value of 72%, and air permeability of 12%.
These figures aid comparison: a higher shading value means less visibility, while measurable air permeability prevents pressure from building up completely. Woven buttonholes along the edges serve as fixing points. One model describes side edges with buttonholes about 5 cm apart, plus upper and lower zones.
If you only need a short run, cut-to-size fabric is useful. A 1 m high version is listed as individually cuttable and recyclable. A 1.5 m fabric shares the key technical values of the larger 1.8 m model and is also described as easy to clean.
Construction tarpaulin instead of net
A construction fence tarpaulin is not an open mesh but a closed PE sheet. The cards in this category give an area weight of 160 g/m² and a format of 1.76 x 3.41 m. This matches the usual grid of a construction fence element and covers it fully. Black, white, and green versions are available.
A closed surface gives a stronger visual barrier than meshed fabric, so it suits places where a clear partition is wanted. Conversely, wind pressure on the sheet is greater than on a permeable net. Fix it along the frame structure and spread the load across several points.
Green HDPE construction fence screening measuring 1.76 x 3.41 m bridges both concepts. Its product card names robust HDPE and large-area coverage for construction fences.
Installation on fences, balconies, and scaffolding
Start by marking the tension direction and fixing points. With nets containing woven buttonholes, cable ties or cord can pass through the edge openings. An evenly tensioned edge prevents widespread sagging and keeps the privacy line straight.
Step 1: Measure
Measure the height and width, allow for overlaps, and check whether the net should run horizontally or vertically. Cut-to-size fabric can be trimmed to the required length.
Step 2: Secure the edge
Fix the upper points first, align the net, then tension the sides and bottom edge. Woven eyelets or buttonholes distribute the load over several holding points.
Step 3: Check tension
After initial tensioning, you can see where adjustment helps. Edges should sit without strong creases but should not be so tight that frames or grids are unnecessarily stressed.
Cable ties, cord, or clips are not automatically included with every net. Individual sets expressly name fixings or a cable-tie set in their name. For all other products, plan installation with suitable accessories in advance.
Uses at a glance
On a garden fence, a green net defines the boundary without creating a solid wall. On a balcony, narrowly cut fabric can screen the lower or side view. At sports grounds and tennis courts, larger nets act as screening to reduce movement behind the enclosure.
On construction sites and event areas, PE construction tarpaulins provide a clear separation and conceal materials and work zones. In gardens, large 2 m nets can form backs for seating areas or vegetable beds. Always attach fixings to a load-bearing structure and do not direct wind loads onto loose elements.
If you also want shade reduction, there is a dedicated page for shade netting. It focuses on light and sun protection, while this category combines privacy and wind functions.
Matching options in the range
Related categories
Installation works best when nets, sheets, and holders are planned together. The cover sheet category handles covers and protective surfaces. Holders, ropes, and cable ties are under Fixings + Accessories. General safety nets for other tasks are in Safety Nets, while Load Securing covers transport.
Frequently asked questions
How do a net and a construction fence tarpaulin differ?
A net has open meshes, lets some air through, and reduces visibility. A construction tarpaulin has a closed PE surface, looks denser, and presents wind with a larger surface.
Which net width fits a garden fence?
The net height should be slightly greater than the visible fence area so it can be fixed above and below. Widths of 1 m, 1.2 m, 1.5 m, 1.8 m, and 2 m are available. With cut-to-size fabric, the length can match the fence.
What does 150 g/m² mean for HDPE fabric?
It is the area weight. Several products in this category use it. For a 1.8 x 50 m model, tensile strength is additionally given as 440 N/5 cm warp and 750 N/5 cm weft, with tear resistance of 120 N.
Does wind pass through the net?
One described HDPE model has 12% air permeability. The net reduces movement behind it but does not completely block airflow like a closed sheet.
How is the material installed?
Nets with woven buttonholes are attached at those points using cable ties or cord. Some sets name fixings in the title. For a net or sheet alone, suitable accessories must be planned separately.
Can privacy netting be cut?
Cut-to-size fabric is described as individually cuttable. A 1 m high version is listed as recyclable, and a 1.5 m fabric is also described as easy to clean.
In brief
A privacy and wind protection net fits when dimensions, mesh structure, and fixing points suit the area. Narrow cut-to-size fabric adapts flexibly, long rolls create continuous lines on fences, and closed PE construction sheets separate construction or event areas clearly from their surroundings. Values such as area weight, strength, temperature range, shading, and air permeability make the variants directly comparable.