Greenhouse film with nailing edge & mesh-reinforced film
Greenhouse film with a nailing edge and transparent mesh-reinforced film are available in different widths, lengths and fastening options. Size, mesh structure, transparency and the choice between a nailing edge and eyelet tape determine which variant suits a cover in the greenhouse, garden or during construction work.
Choose mesh-reinforced film by area and shape
Mesh-reinforced film is listed in this category as greenhouse film, garden film, construction film or cover film. The dimensions of the area to be covered are the first factor in the selection. A narrow sheet suits a strip or side surface; a wider variant covers a greater span with fewer cut pieces. The variants also differ in nailing edge, eyelet tape, transparency, UV rating and the material structure stated on the product sheet.
Match width and length first
The product details show cut sheets with widths of 1.5 m, 2 m, 3 m and 4 m. For short sections, options such as 2 x 1 m, 3 x 1 m and 4 x 1 m are available. Other specific formats are 3 x 4 m with 12 m², 4 x 5 m with 20 m², 5 x 6 m with 30 m², 3 x 20 m and 6 x 10 m with 60 m². Measure the width and length of the area, then allow for the edge needed for fastening.
Distinguish the nailing edge from eyelet tape
Many mesh-reinforced films have a nailing edge; on the 2 x 1 m variant, it runs lengthwise. The edge strip is taken into account when planning the fastening. The transparent 3 x 4 m cover sheet is described as having eyelet tape around the entire perimeter, with pre-punched eyelets spaced 10 cm apart; the 4 x 5 m cover sheet also specifies eyelets every 10 cm. Sheets with a nailing edge and ready-made cover sheets with eyelet tape therefore differ in how they are fixed.
Variants for greenhouse, garden and construction
For plant covers, transparent mesh-reinforced films with a nailing edge are listed in several formats. The product descriptions also name garden, construction and cover film as areas of use. Transparency can matter where the covered area should remain visible or light should pass through the film. Transparent cover sheets are listed for garden furniture, stacks of wood and building materials. Selection is therefore based on the area and the preferred fastening method.
Mesh-reinforced film with nailing edge 2 x 1 metreTransparent film with green mesh, HDPE/PP twisted fabric and LDPE coating on both sides. The stated values are approx. 255–265 g/m², approx. 12 mm mesh size and UV stability up to 300 Kly.
Transparent cover sheet 5 x 6 mThe mesh-reinforced film is described as covering 30 m² and as transparent, tear-resistant, waterproof and UV-resistant. The product weighs 7.5 kg.
Mesh-reinforced film with nailing edge 3 x 20 mThis greenhouse film is specified as 3 x 20 m and described as UV-stable and tear-resistant. The product weighs 16.8 kg.
For the 4 x 5 m variant covering 20 m², the product card specifies a transparent, light-transmitting, waterproof mesh-reinforced film with eyelets every 10 cm. It complements the choice between a nailing edge and eyelet tape: transparent cover sheet 4 x 5 m.
Material, mesh and stated properties
For the 2 x 1 m, 3 x 1 m and 4 x 1 m variants, the descriptions mention HDPE/PP twisted fabric, LDPE coating on both sides and transparent film with green mesh. The values are approx. 255–265 g/m² with a nailing edge; they also specify material tear strength of approx. 700 N/5 cm, approx. 12 mm mesh size, UV stability up to 300 Kly and a temperature range from -40 to +80 °C. The dimensional tolerance is stated as +/- 2%.
Other product cards give specific weights: 3 x 4 m 3 kg, 4 x 5 m 5 kg, 4 x 8 m 7.68 kg, 3 x 11 m 9.24 kg, 2 x 20 m 10.4 kg and 6 x 10 m 15 kg. These values help with handling plans; each is assigned to the format named.
How to distinguish transparent variants
The 3 x 11 m mesh-reinforced film is described as transparent and light-transmitting. The 4 x 5 m cover sheet is also light-transmitting. For the 2 x 1 m variant, the colour is stated as transparent film with green mesh. Transparency and mesh colour are therefore specific features of individual variants, not a blanket statement about every cover sheet.
Plan the fastening to suit the film
A nailing edge is part of many sheet variants and is referred to in the product cards as a fastening edge. On sheets with eyelet tape, the fastening points are evenly spaced: the transparent 3 x 4 m cover sheet is described as having pre-punched eyelets every 10 cm. If film or a cover sheet is to be fixed without eyelets, the product card for the black fastening clip states that it is suitable for film, cover sheets and fabric and can be reused.
Nailing edge
For mesh-reinforced films with a nailing edge, the edge is already included in the product name. The 2 x 1 m variant specifies an edge running lengthwise.
Eyelet tape
The transparent 3 x 4 m cover sheet has eyelet tape around the entire perimeter, with pre-punched eyelets spaced 10 cm apart.
Clip, hook and cable ties
The clip is described for film, cover sheets and fabric without eyelets. The elastic hook measures 6 mm x 25 cm; cable ties are available, among other options, in packs of 100 measuring 200 x 2.5 mm or 300 x 7.6 mm.
The elastic hook is listed as a black tension cord with a rubber-coated spiral hook. In the variants named, the cable ties are made of polyamide PA6.6; the black 200 x 2.5 mm and 300 x 7.6 mm versions are described as UV-resistant. This allows the accessory details to be assigned separately from the film dimensions.
Selection guide for small, medium and large areas
Small areas and cut pieces
For short covers, the product cards list 2 x 1 m, 3 x 1 m and 4 x 1 m. A transparent 3 x 4 m cover sheet covering 12 m² is described as a variant for smaller areas. These formats are manageable and can be compared with the planned area by width and length.
Medium-sized covers
For medium-sized areas, specific options include 4 x 5 m with 20 m², 5 x 6 m with 30 m² and 4 x 8 m. The 4 x 5 m sheet is described as transparent, light-transmitting, waterproof and fitted with eyelets every 10 cm. The 4 x 8 m garden film has a nailing edge.
Long sheets and larger areas
Longer covers include 2 x 12 m, 2 x 20 m and 3 x 20 m. The transparent mesh-reinforced cover sheet measuring 6 x 10 m covers 60 m²; its weight is stated as 15 kg. For long sheets, the area, weight and intended fastening method all matter.
Related areas for cover sheets and nets
Alongside mesh-reinforced film, the covers and nets section contains other ranges for covering, fastening and nets. The following areas help assign related tasks.
Additional sheets for covering tasks.
Accessories for fixing cover sheets.
Nets for additional protection tasks.
Related area for nets.
Guides for planning and fastening
When planning a plastic-film greenhouse or a cover, the following articles supplement selection by size and fastening. The topics address different film applications and work steps.
Planning and building a greenhouse: the complete guide to protected cultivation
Basics for planning and setting up protected cultivation.
Laying pond liner: step by step to your own garden pond
Work steps for laying film in the garden.
Frequently asked questions about mesh-reinforced film
Which width suits my area?
The product cards list widths of 1.5 m, 2 m, 3 m and 4 m. Compare these details with the measured area and also consider the stated length of the selected format.
Which dimensions are available for short covers?
For short cut pieces, the listed sizes are 2 x 1 m, 3 x 1 m and 4 x 1 m. A transparent cover sheet measuring 3 x 4 m covers 12 m² and is described for smaller areas.
What is the difference between a nailing edge and eyelet tape?
For many mesh-reinforced films, the nailing edge is listed as an edge variant. The transparent 3 x 4 m sheet has eyelet tape around the perimeter, with eyelets every 10 cm. The fastening points therefore differ in design.
Are mesh-reinforced films transparent?
Several product details specify a transparent variant, including the 2 x 1 m film with green mesh, the 3 x 11 m film and the 3 x 4 m, 4 x 5 m and 5 x 6 m cover sheets. The statement applies to the individual product in each case.
Which material details are provided?
For the 2 x 1 m, 3 x 1 m and 4 x 1 m variants, the details include HDPE/PP twisted fabric, LDPE coating on both sides, approx. 255–265 g/m², approx. 12 mm mesh size, UV stability up to 300 Kly and -40 to +80 °C.
Which fasteners suit film and cover sheets?
The black fastening clip is described for film, cover sheets and fabric without eyelets and can be reused. A black elastic hook measuring 6 mm x 25 cm and PA6.6 cable ties in various sizes are also listed.