26mm Press Fitting Wall Elbow - 3/4 Inch

Product Features and Benefits

• Certification: You can rely on the press fitting wall elbow being completely suitable for potable water.
• Compliance: The elbow meets the stringent requirements, ensuring the highest quality.
• High Durability: Continuous load capacity of 10 bar at 70°C over 50 years ensures a long service life for you.
• Maximum Operating Temperature: The elbow can withstand temperatures up to 95°C.
• Unpressed Leaks: You'll immediately recognize whether the connection has been pressed correctly.
• Optimized Contour: You'll enjoy an unobstructed passage without flow noise.
• Excellent Values: The large inner diameter ensures optimal flow.
• Low Lead Content: All components are certified and comply with regulations for potable water.
• Two Pipe Systems: One fitting system for multi-layer composite and copper pipes (certified).
• Secure Connection: Prevents the pipe from being pushed out before the pressing process, giving you peace of mind.
• Cavity-Free Pressing: Two O-rings prevent the ingress of atmospheric oxygen, ensuring a tight seal.
• High-Quality Material: Composite pipe system press fitting made of special brass (CU Zn 40 Pb2).
• Stainless Steel Press Sleeve: Guarantees a secure and permanent connection.
• Plastic Guide Ring: Provides secure crimping, even in difficult situations.
• Inspection Window: You can immediately see whether the pipe has been correctly inserted.
• Quality: Quality you can rely on.

How to Use – Step by Step

1. Step 1: Cut the pipe – Use a suitable tool to cut the pipe to the required length.
2. Step 2: Calibrate and deburr the pipe end – After cutting, the pipe end must be calibrated and deburred with a calibrator.
3. Step 3: Insert the pipe – Insert the pipe into the fitting until it stops. The correct insertion depth can be seen through the three inspection windows of the stainless steel press sleeve.
4. Step 4: Press – Press using a suitable pressing tool and a pressing jaw that is dimensionally accurate depending on the fitting dimensions.

Technical Data

Frequently Asked Questions (FAQ)

Is the press fitting wall elbow suitable for all pipe systems?

The press fitting wall elbow is suitable for multi-layer composite and copper pipes (certified).

Which pressing tools do I need for the installation?

You will need a suitable pressing tool and a pressing jaw that is dimensionally accurate depending on the fitting dimensions.

How long will the press fitting wall elbow last?

The elbow is designed for a continuous load capacity of 10 bar at 70°C over 50 years.

What does "unpressed leaking" mean?

This function serves as a safety feature. If the fitting has not been pressed correctly, the connection will leak, allowing you to detect the error immediately.

Is the press fitting wall elbow suitable for potable water?

Yes, the press fitting wall elbow is completely suitable for potable water (certified) and complies with regulations.

Why Buy From Us?

Boni-Shop offers not only high-quality products but also excellent customer service. Benefit from our fast delivery and expert advice. With us, you'll find everything you need for your installations – all from a single source.