20mm Press Fitting T-Piece, Multilayer Pipe, Plumbing Fitting

The Pressfitting is DVGW-certified for drinking water and is fully suitable for this purpose. Approval for gas installations is not listed in the product description.

This T-piece is explicitly marked as a 20mm press fitting. This means all three connections are intended for pipes with a diameter of 20mm. It is not a reduced T-piece.

The two O-rings and the void-free compression prevent air oxygen from entering the system. This protects against corrosion and extends the lifespan of your pipelines, especially in heating systems.

A regulation-compliant and secure connection exists only with system-approved components for all press systems. Using other connected pipes than those sold by Boni-Shop is at your own risk.

Yes, the integrated plastic guide ring enables secure crimping even under difficult conditions and in tight spaces. This increases installation safety.

Yes, the press fitting is flow-optimized and has a free passage. This means there are virtually no flow noises in the pipeline.

The service life of 50 years applies to operating temperatures up to 70° C at 10 bar. Even in continuous hot water operation up to this temperature, longevity is ensured.

Yes, this pressfitting is DVGW-certified and fully suitable for drinking water. The continuous load capacity of 10 bar is sufficient for a cold water connection and provides you with a secure connection.

Yes, the T-piece has an integrated control window in the stainless steel press sleeve. It serves as a safety plus for the user and indicates the correct insertion depth of the pipe.

Yes, the press fitting is DVGW-certified for multi-layer composite and copper pipes. It is suitable for copper pipes of the 20mm dimension.

Multi-contour compatibility (TH + U) means you can process the T-piece with both TH and U pressing jaws. This offers you flexibility in choosing or using your pressing tool.

You need a suitable press tool with TH or U press profile, as the T-piece is multi-profile compatible (TH+U). It is suitable for multi-layer composite and copper pipes (DVGW-certified).

No, the T-piece is unpressurized and leaky. A secure and tight connection is only achieved through the proper pressing process with the appropriate pressing tool.

Yes, the T-piece is suitable for hot water applications. It withstands a maximum operating temperature of 95° C. The long-term durability is at 70° C for over 50 years.

The T-piece is made of high-performance plastic PPSU, which is 100% lead-free and highly resistant. It is shatterproof, durable, and therefore ideal for drinking water installations.

Yes, the T-piece has three inspection windows in the stainless steel sleeve. These allow easy visual verification that the pipe has been inserted to the correct depth.

The two o-rings are designed for optimal security. They ensure increased tightness and reliability of the press connection under operating conditions.

The PPSU Pressfitting is designed for a durability of 50 years at 10 bar and 70° C. The construction with two O-rings and a stable guide ring ensures high safety.

Yes, the PPSU t-piece is flow-optimized and causes almost no noise. This allows for an undisturbed installation even in walls.

Yes, this PPSU Pressfitting is 100% lead-free, as it is made from high-performance plastic (polyphenylsulfone). All materials are safe for use in drinking water and are DVGW-certified.

This PPSU pressfitting t-piece is specifically designed for 26mm pipe diameter. For other diameters or reductions, you need the corresponding fittings.

Using composite pipes other than those sold by Boni-Shop is at your own risk. Compliance with regulations is only guaranteed with system-approved components.

Yes, the installation manual requires that the pipe end be calibrated and deburred after cutting. This is crucial for a correct and tight connection.

The T-piece is designed for a durability of 50 years at up to 70°C. The maximum operating temperature is 95°C, but not for a 50-year durability in this temperature range.

Yes, the system is designed so that uncompressed connections can be located during the pressure test. This applies to dimensions 16-32 mm.

Yes, the PPSU Pressfitting T-piece is ideal for use in heating systems, including underfloor heating. It is suitable for high temperatures up to 95°C.

Yes, the stable plastic guide ring ensures secure crimping, even in tight spots. Additionally, the three inspection windows in the stainless steel sleeve help verify the correct insertion depth.

Yes, the three inspection windows in the stainless steel press sleeve serve to visually check the correct pipe insertion depth. They ensure the pipe is inserted deep enough.

You need a press jaw with a TH contour that matches the fitting dimensions. Using unsuitable press jaws can compromise the seal of the connection.

Yes, the T-piece is flow-optimized and has a free passage. This results in a very good resistance coefficient and virtually no flow noises in the system.