1 inch Suction Hose, Suction and Discharge Hose Set, with Fittings

The hose is made of plastic with a reinforcement spiral. This spiral is specifically designed to maintain the hose's shape and prevent collapse even under strong suction.

Yes, the hose is made of plastic with a reinforcement spiral, which gives it high durability and flexibility. This helps prevent bending at curves.

The hose is designed as a suction and pressure hose and is therefore fundamentally suitable for suction processes. Pay attention to the maximum suction heights of your pump in combination with the hose length of 10 meters.

The hose is equipped with a reinforcement spiral and is thus robustly designed. It is suitable for versatile use in the garden, including dragging over uneven ground.

Yes, the hose is very suitable for pumping from rain barrels or for filling, thanks to its suction and pressure function as well as the 1-inch diameter.

The 10-meter hose is ideal for watering and transporting water to and from ponds. The exact range depends on the position of your pump.

Yes, the double-sided hose fittings are designed for the standard inner diameter of 1 inch (25 mm). Other 1-inch attachments or accessories are usually compatible.

The hose is designed as an irrigation hose for pool, pond, and garden. There are no specific details regarding suitability for drinking water.

Yes, the set comes with double-sided hose fittings and hose clamps, so it is ready for immediate connection to your pump. The inner diameter is 1 inch (25 mm).

Yes, the hose is designed as a suction and pressure hose and is equipped with double-sided hose fittings for direct connection. The inner diameter is 1 inch (25 mm).

Yes, the BONI-82231-10 set with a 1-inch inner diameter and 10 meters in length is well-sized for draining garden ponds. It ensures quick water transfer.

Yes, the set is designed as a suction and pressure hose. It is therefore well suited for pumping and transporting water, for example from lower areas like a basement.

The set is excellent for emptying pools. Its robustness and 1-inch diameter enable efficient water transport.

The product description does not include information on frost resistance. To ensure the longevity of the plastic with reinforcement spiral, we recommend storing the hose dry at freezing temperatures.

The stainless steel hose clamps and brass components are designed for durability and corrosion resistance, so the set will last a summer outdoors. However, an occasional visual inspection of the connections, especially after the first use, is advisable.

Yes, the hose is designed for a working pressure of 6 bar. This is sufficient for many applications in the pond and pool sector, agriculture, or irrigation technology.

The suction and pressure hose set is intended for use in the construction industry. The robust construction and included suction strainer make it suitable for applications with dirty water pumps.

The product description does not explicitly state frost resistance for the hose. The valve is temperature resistant up to 100°C, but we recommend not storing the hose permanently outside in frost.

Yes, the 9-meter length of the hose set provides flexible reach. The floating intake is specifically designed to always draw the cleanest water from the surface, regardless of the water level.

Yes, due to the robust, UV- and ozone-resistant material, the hose is also suitable for use with saltwater. This makes it ideal for pools and ponds.

Yes, the hose is very robust despite its flexibility. It has high abrasion resistance and is suitable for use as a drag hose.

The set is described as robust and abrasion-resistant, promising high durability even with frequent use. You can rely on a long lifespan, even when in contact with rougher surfaces like cobblestones.

The hose is designed for a working pressure of up to 6 bar. That is sufficient for most garden irrigation systems.

The suction basket is designed to retain coarse particles like small leaves or dirt. For very fine suspended matter, an additional filter on the pump may be useful.

The hose is designed for a working pressure of up to 6 bar. This is usually sufficient to efficiently operate most standard garden sprinklers. The actual performance also depends on your pump.

The quick couplings are designed for common systems. Therefore, it is likely that they are also compatible with your older garden pump.

Yes, the brass double nipple included in the set has a 1" external thread (AG) and fits directly onto most standard garden pumps with 1" internal thread (IG). The set is designed for easy installation.

The hose is light and flexible despite its robust construction. The inner sleeve with an embedded plastic reinforcement spiral ensures shape stability and prevents easy bending, even with frequent movement.

Yes, the set is designed for suction and pressure applications and draws water on its own. The included foot valve with spring also prevents water from running back and supports efficient operation.

Yes, the hose clamps are made of high-quality stainless steel (W4), which ensures high corrosion resistance. They are therefore also suitable for permanent use with pool water.