110mm Rainwater Collector - Graphite Rain Diverter for Downspouts

Yes, the rain collector is made of polyvinyl chloride (PVC) and has a PZH approval. This confirms the hygienic safety of the material for contact with water.

If the drain to the tank is not manually closed with the stopper and the rain barrel is full, the rainwater will continue to drain down through the downpipe.

Yes, the collector comes complete with a connection, quick connector and an end cap. These elements allow connection to a container such as a rain barrel.

The PVC material used is certified according to ISO 9001:2015 and is designed for durability and resistance to aging. Premature embrittlement or cracking with proper use is therefore unlikely.

The material of the rain collector is UV-stabilized. The color change after aging is limited to no more than 3 gray levels, which means good color stability over time.

It is recommended not to mount the rain collector in places with a lot of contamination, such as tree leaves. If necessary, the collector must be rinsed several times with pressurized water.

The closure plug is used to close the drain to the collection container. For cleaning the collector itself, rinsing with pressurized water is recommended.

The rain collector is intended for installation in downpipes with an outer diameter of 110mm. The type of material of the downpipe is not restricted in the description.

The rain collector is not designed for large amounts of contaminants such as leaves. We recommend mounting in less exposed locations or installing an additional leaf filter in the downpipe above the collector.

Yes, the collector has a quick coupling of size 1'', to which a garden hose can be connected.

The PVC material of the rain collector has good impact resistance (TIR ≤ 10%). It is therefore robust enough to withstand common weather conditions such as hail.

Yes, the rain collector is made of robust PVC with a Vicat softening point of ≥ 75 °C. The material is designed for use in gutter systems and also withstands direct sunlight well.

The rain collector with 1'' quick connector is designed for efficient water drainage even with heavy rainfall. It is designed for use on standard gutter systems.

Although pressure washing is recommended, the collector can also be rinsed with a strong garden hose. Make sure the water runs freely to remove all residue.

The quick connector of the rain collector is size 1''. For common garden hoses (often 1/2'' or 3/4'') a suitable reducing adapter is required, this is not included.

Yes, the rain collector has a stopper. With it, the drain to the collection container can be completely closed if necessary, even if no rainwater is to be collected.

The kit includes a connection and a quick connection, which allows the garden hose connection and the discharge of rainwater into a container like a rain barrel. This is suitable for common barrels.

The rain collector itself does not have a fine filter function for moss or other small suspended matter. In the case of heavily contaminated roof water, the installation of an additional filter before the collection container may be advisable.

The rain collector is made of PVC. Specific information on frost resistance is not listed in the product description. It is recommended to empty the system before the onset of frost and, if necessary, close the drain.

The rain collector has a height of 210 mm (21 cm). For installation, a correspondingly large piece must be removed from the downpipe in order to insert the device precisely.

The rain collector is designed for efficient rainwater recovery and storage. The product description does not specify a flow rate that would define an upper limit for extreme rainfall.

Yes, the rain collector is explicitly designed for installation in existing downpipes with an outer diameter of 110mm and can be retrofitted.

The assembly is deliberately designed to be simple and can be carried out by yourself. The set contains all the necessary elements for a quick connection to the tank.

The assembly of the collector is described as simple and can be done yourself. No special tools are required for this, standard tools should suffice.

The rain collector is designed for subsequent installation in existing downpipes. The installation is easy and can be done by yourself.

Yes, the rain collector has an additional stopper. This makes it possible to completely close the drain to the tank if necessary.

The collector directs the rainwater into the container by means of gravity. A minimum height above the tank is not explicitly specified, however, a slight slope is required for the water flow.

The collector is precisely designed for downpipes with an outer diameter of 110mm. For a safe and tight installation, the downpipe dimensions should match as closely as possible.

We recommend mounting the rain collector in areas without large amounts of contaminants like tree leaves. If contaminated, the device should be cleaned several times with pressurized water.

In case of contamination, the rain collector should be rinsed several times with pressurized water. It is generally recommended not to install it in places with large amounts of contaminants like tree leaves.