1 Inch Hose Connector - Garden Hose Repair Kit

Yes, the quick coupling is designed for 1 inch plug-in systems, the connector size of which is approx. 26mm. Your hose should therefore fit.

Yes, thanks to the robust stainless steel clamp mechanism and the ABS housing, the coupling is suitable for permanent outdoor use during the gardening season, even in the rain.

Yes, since it's a quick coupling without a water stop, the water comes out immediately when the connection is disconnected. Plan for this when using.

No, the quick coupling is designed as a plug-in system. Usually, no special tools are required for mounting on the hose end, only the appropriate 1-inch hose piece.

Yes, the coupling is designed for a robust and durable connection. The stainless steel clamp and the ABS quality housing ensure a safe and tight function even during permanent operation.

The stainless steel clamp and the ABS housing ensure a robust and durable connection. It is designed for frequent connecting and disconnecting in use.

Yes, the clamp is made of stainless steel. With proper use and care, it remains permanently corrosion-resistant.

The stainless steel clamp is corrosion-resistant. There is no explicit approval for permanent use with salt water.

Yes, the plug size of approx. 26 mm is crucial for a precise fit and a tight and secure connection in the 1 inch plug system.

The coupling with stainless steel clamps and ABS housing is designed for common garden pressures and offers a robust connection. Specific pressure ratings are not available.

The coupling is without a water stop, which means the water doesn't automatically stop when the connection is disconnected. Therefore, it is recommended to interrupt the water supply before disconnecting.

Yes, the clutch is designed for easy handling. The plug-in system allows for quick and easy connection and disconnection without much effort.

Yes, the stainless steel clamps and the ABS quality housing ensure robustness. The coupling is designed for a long-lasting and reliable connection in the garden.

The coupling is designed for standardized 1 inch plug-in systems. As long as the other system also uses a 1 inch plug-in system with a plug size of approx. 26mm, compatibility should be given.

No, the coupling is only suitable for 1-inch plug-in systems. For other hose sizes, appropriate adapters or other couplings are required.

The quick coupling offers a robust and durable connection with high-quality stainless steel clamps and ABS quality. It is designed to withstand even high loads.

The quick coupling is designed for 1-inch plug-in systems, which corresponds to an inner hose diameter of about 25.4 mm. A hose with an inner diameter of 25 mm should therefore fit well.

The housing made of ABS quality and the clamps made of stainless steel are robust. However, for a long service life, we recommend storing the coupling dry and frost-free in severe frost.

The connector is designed exclusively for 1 inch plug-in systems. For 3/4 inch hoses, you need a suitable adapter or a 3/4 inch coupling.

The clamp work is made of stainless steel, which offers high resistance to corrosion. This ensures a long service life.

The clamp assembly is made of stainless steel, which ensures high resistance to corrosion and environmental influences. It is designed to maintain its function even under such conditions.

The quick coupling is made of robust stainless steel and ABS quality. It is designed for daily use in the garden and offers a durable connection.

The housing is made of high-quality ABS plastic, which is robust enough for garden use. It withstands the usual weather conditions, including sunlight.

Since this quick coupling is without a water stop, water will come out when the connection is disconnected. You should interrupt the water supply before disconnecting.

The quick coupling is designed for above-ground garden hoses and irrigation systems. For permanent underground installations, specialized, screwed connections are often better suited.

The stainless steel clamp and the precise fit ensure a tight and secure connection. With a slight pull on the hose, the coupling usually holds reliably.

The coupling is only suitable for 1 inch plug-in systems. The plug size is approx. 26mm. If your existing system meets this standard, compatibility is given.

Yes, since the coupling has no water stop, water will flow out when disconnecting. Close the faucet before changing irrigation devices.

The plug-in system allows for easy and quick connection. Handling should be problem-free even when wet.

The quick coupling is designed exclusively for 1 inch plug-in systems. Make sure that your garden hose or the system to be connected also uses a 1 inch plug-in system with a connector size of approx. 26mm.