1-Inch Suction and Discharge Hose Kit, 8 Meter

Yes, the hose clamps are made of high-quality stainless steel (W4), which ensures high corrosion resistance. They are therefore also suitable for permanent use with pool water.

The BONI-52227-8 is designed as a suction and pressure hose and is very robust due to its high-quality materials. It is designed to withstand pressure under various conditions.

The foot valve with spring allows water to pass in only one direction. You can briefly hold it under water to visually check the opening and closing function. This ensures the reliable operation of your pump before use.

The stainless steel hose clamps W4 offer high corrosion resistance. Brass components like the quick coupling and foot valve are also robust and designed for longevity.

The quick coupling is made of pressed brass and designed for an easy, secure connection. In combination with the robust stainless steel hose clamps W4, it ensures reliable sealing even during prolonged operation.

For an airtight connection, use the hose fitting with external thread. The included stainless steel hose clamps W4 ensure a secure and tight fit to your pump.

The hose has a length of 8 meters, which is often sufficient for watering in the garden and reaching more distant beds. You can use it flexibly.

Yes, the hose is resistant to temperatures up to 100°C. It can therefore be used without any problems for applications with hot water, such as in a heating cellar.

The suction strainer is designed to catch dirt particles and thus protect your pump. In heavily contaminated water, such as in a stream, regular inspection and cleaning of the strainer is recommended.

The spring-loaded foot valve prevents water from flowing back and only opens in one direction (when sucking). Filling the hose from the top is made harder because the valve does not allow water into the hose.

Yes, with a length of 8 meters, the BONI-52227-8 provides sufficient reach for a 7-meter distance. This leaves a reserve of about one meter for laying or positioning.

The hose is designed for suction and pressure applications, but the suction height primarily depends on the performance of your pump. Ensure the suction line is fully filled with water before starting to avoid air in the system.

Yes, the hose is resistant to temperatures up to 100°C. It is therefore also suitable for conveying hot water in the construction industry.

The stainless steel hose clamps and brass components are designed for durability and corrosion resistance, so the set will last a summer outdoors. However, an occasional visual inspection of the connections, especially after the first use, is advisable.

The hose is made of plastic with a reinforcement spiral. This spiral is specifically designed to maintain the hose's shape and prevent collapse even under strong suction.

Yes, the hose is designed for a working pressure of 6 bar. This is sufficient for many applications in the pond and pool sector, agriculture, or irrigation technology.

The suction and pressure hose set is intended for use in the construction industry. The robust construction and included suction strainer make it suitable for applications with dirty water pumps.

The product description does not explicitly state frost resistance for the hose. The valve is temperature resistant up to 100°C, but we recommend not storing the hose permanently outside in frost.

Yes, the 9-meter length of the hose set provides flexible reach. The floating intake is specifically designed to always draw the cleanest water from the surface, regardless of the water level.

Yes, due to the robust, UV- and ozone-resistant material, the hose is also suitable for use with saltwater. This makes it ideal for pools and ponds.

Yes, the hose is very robust despite its flexibility. It has high abrasion resistance and is suitable for use as a drag hose.

The set is described as robust and abrasion-resistant, promising high durability even with frequent use. You can rely on a long lifespan, even when in contact with rougher surfaces like cobblestones.

The hose is designed for a working pressure of up to 6 bar. That is sufficient for most garden irrigation systems.

The suction basket is designed to retain coarse particles like small leaves or dirt. For very fine suspended matter, an additional filter on the pump may be useful.

The hose is designed for a working pressure of up to 6 bar. This is usually sufficient to efficiently operate most standard garden sprinklers. The actual performance also depends on your pump.

The quick couplings are designed for common systems. Therefore, it is likely that they are also compatible with your older garden pump.

Yes, the brass double nipple included in the set has a 1" external thread (AG) and fits directly onto most standard garden pumps with 1" internal thread (IG). The set is designed for easy installation.

The hose is light and flexible despite its robust construction. The inner sleeve with an embedded plastic reinforcement spiral ensures shape stability and prevents easy bending, even with frequent movement.

Yes, the set is designed for suction and pressure applications and draws water on its own. The included foot valve with spring also prevents water from running back and supports efficient operation.

The quick coupling made of pressed brass allows for a quick and easy connection without additional tools. The set is designed for easy installation.