1/2 Inch 3 Way Tee Fitting, Brass Pipe Connector

Yes, since the manifold is made of brass, it can be used for drinking water installations. Ensure compliance with local regulations.

Yes, the 3-way splitter allows you to distribute the output of your 1/2 inch garden pump to two sprinklers. This way you can water two areas at the same time.

The distributor is designed for water pipes in sanitary and garden areas. We cannot recommend its use for pneumatic systems, as the pressure resistance is not specified for this purpose.

Yes, the 1/2 inch 3-way tee allows you to split a main line into two separate outlets. This way you can operate your outdoor shower and another faucet simultaneously.

Yes, the brass splitter is robust and suitable for use in plumbing installations, including hot water lines.

The splitter has 1/2 inch threaded connections. For click systems, you need appropriate adapters that fit these threads.

Yes, the 3-way splitter is specifically designed to split a 1/2-inch line into two separate 1/2-inch lines or conversely to combine two into one.

The brass distributor itself is robust, but frozen water inside can cause damage in frost. It is advisable to drain the system before winter or store it frost-free.

Yes, the distributor is made of brass and designed for use in garden irrigation. It offers a robust and durable solution even for outdoor use.

The 1/2 inch T-piece is suitable for flexible and rigid pipe systems in the sanitary and garden areas. The precise threads allow for a hassle-free connection even with copper pipes.

The BONI-51-205 features precise threads that ensure a permanently tight connection. For optimal sealing during installation, the use of sealing tape or hemp is recommended.

Yes, thanks to the robust brass material and permanently tight connection, the distributor is also suitable for flush-mounted installations.

Yes, the tee with 1/2 inch connection size is suitable for connecting to common garden pumps to supply multiple lines.

The brass distributor is designed for common pressures in garden and sanitary systems and ensures a reliable connection.

The T-piece is primarily intended for the sanitary sector and garden irrigation. For heating installations, you should check the specific requirements and material approvals.

The brass material of the distributor offers good corrosion resistance but is not primarily designed for prolonged saltwater contact.

Yes, if the outlet of your rain barrel is 1/2 inch, you can use the 3-way distributor to connect two watering hoses and distribute the water efficiently.

Yes, the 1/2 inch splitter fits directly onto a faucet with the corresponding thread and allows the connection of two additional 1/2 inch hoses.

The material brass is corrosion-resistant and thus suitable for installation in the ground. Ensure proper sealing of the connections.

Yes, the BONI-51-205 is suitable for rainwater cistern drains due to its 1/2 inch connection size and robust brass construction for water distribution.