1/2 Inch Garden Hose Quick Connector with Water Stop

With regular maintenance and proper use, the branch can last several years. However, the lifespan depends on the usage conditions.

The hose connector is made of high-quality plastic and is designed as a reliable, permanent solution. It is suitable for regular use in the garden.

You have to turn off the faucet. This quick coupling is without a water stop, so the water will continue to run when you remove the sprayer.

Yes, the quick coupling is designed for 1 inch plug-in systems, the connector size of which is approx. 26mm. Your hose should therefore fit.

Yes, the branch can be used in public parks, provided the irrigation system is compatible.

The branch is not frost-resistant. It is recommended to remove it before winter to avoid damage.

The branch is designed for garden irrigation systems and is not intended for industrial applications.

The splitter is designed for home use in garden irrigation systems. For agricultural use, more specialized connectors may be required.

Yes, the tee is well-suited for use in automatic irrigation systems.

The branch is more suitable for larger hose systems. For drip irrigation, more specialized connectors might be better suited.

The stated price refers to a single branch.

The branch fitting is specifically designed for 1-inch hoses. Use with other hose sizes is not recommended.

The branch is designed for garden irrigation systems and is not suitable for pressure washers.

Yes, the branch can be used without any problems in greenhouses.

The branch is designed for water pipes and is not specifically suitable for fog systems.

Yes, the tee is suitable for use in irrigation systems.

The plastic is generally UV resistant, but prolonged direct sunlight can affect its durability.

The branch is made of plastic and designed for use in standard irrigation systems. High water pressure can affect its lifespan.

Yes, the tee is suitable for directing water in two directions for a sprinkler system.

Yes, the branch can be used in landscape maintenance, provided the irrigation system is compatible.

The installation of the branch is easy and requires no special tools. It can be directly inserted into the 1-inch plug-in system.

The tee is designed for garden irrigation systems and is not suitable for construction-specific applications.

The branch is not certified for drinking water. It is recommended to use it exclusively for garden irrigation.

The connector is intended for 1-inch garden hoses with the corresponding hose pieces. If the irrigation computer has a 1-inch hose connection, the hose can be connected to it.

Yes, for an absolutely tight and reliable connection, it is important that the hose ends are fully and correctly inserted into the connector. A clear click or tightening of the union nut (if available) indicates the correct assembly.

Yes, the connector is designed for easy and quick assembly. It can be attached without special tools to two hose ends with attached hose pieces 1".

The hose connector is used for the tight connection of two intact 1-inch hose ends. It is not intended to directly bridge existing holes or leaks in a hose.

The connector is primarily intended for garden hoses for garden irrigation and terrace cleaning. If your pond pump has 1-inch hose ends, the connector can connect them.

The connector ensures a reliable and tight connection between two hose ends. It is designed for flexible use in the garden and keeps the connection stable.

Yes, the hose connector BONI-57-041 is designed to ensure a reliable and tight connection. This helps to avoid leaks.