1/2 Inch Garden Hose Repair Connector | Hose Mender & Coupling

This repair piece is exclusively intended for connecting two hose ends of the same diameter. It is not intended for direct connection to pumps or other devices.

There is no exact specification for the maximum pressure. The connector is designed for the usual water pressure in garden hoses and provides a tight connection.

The BONI-51-100 is designed for repairing garden hoses in the usual operating pressure range. It provides a reliable and tight connection between two hose ends.

The repair with the repair part BONI-51-100 is quick and easy. You can have your hose ready for use in no time.

No, no additional tools are required to connect the BONI-51-100. Installation is simple and straightforward.

This repair piece is specifically designed for hoses with a diameter of 1/2 inch. It is not suitable for a 3/4 inch hose.

The repair part is made of plastic and is primarily intended for garden hoses, which usually carry cold water. Suitability for hot water from a boiler is not specified.

The connector BONI-51-100 is intended for quickly connecting two hose ends. For a small hole, cut out the damaged area and reconnect the two ends.

The connector provides a reliable and quick repair for your garden hose. With continuous friction or extreme loads at the same spot, however, the seal may change over time.

The application area of BONI-51-100 is explicitly garden hose repair. For pond hoses, specific connectors with other requirements are more suitable.

The BONI-51-100 is designed for repairing garden hoses. The product description does not mention suitability for underground installation.

For an easy and tool-free connection, some flexibility of the hose end is advantageous. With very hard material, attaching the connector could be difficult.

For an optimal and tight connection, the hose ends should be cut as cleanly and straight as possible. This ensures the best fit of the repair part.

The repair piece is made of plastic and designed as a reliable solution for hose repair. It withstands the usual stresses of a garden hose.

The repair piece is made of plastic. There are no specific details on UV resistance under continuous sunlight in the product description.

The hose connector is designed as a permanent repair piece to create a lasting connection. Easy, non-destructive disassembly for reuse is not intended.

The connector is suitable for hoses with a diameter of 1/2 inch. Specific details about the hose wall thickness are not listed in the product description.

The connector is made of plastic and designed as a reliable solution for garden hose repair. It is intended to make the hose fully operational again.

The hose connector is compactly designed to allow for quick and easy repair. Rolling up the hose is usually still possible, but the connector creates a slight thickening.

Yes, the connector BONI-51-100 allows for a quick and straightforward connection of two hose ends, regardless of the hoses' age, as long as they have a 1/2 inch diameter.

Yes, the water stop function automatically interrupts the water flow as soon as an end device like a sprinkler is removed. This allows for a temporary stop of water withdrawal without closing the main tap.

Yes, the quick coupling is designed for permanent use and frequent changing of end devices thanks to its stainless steel clamp mechanism and ABS housing. Its robust construction guarantees a long lifespan.

With regular maintenance and proper use, the branch can last several years. However, the lifespan depends on the usage conditions.

The hose connector is made of high-quality plastic and is designed as a reliable, permanent solution. It is suitable for regular use in the garden.

You have to turn off the faucet. This quick coupling is without a water stop, so the water will continue to run when you remove the sprayer.

Yes, the quick coupling is designed for 1 inch plug-in systems, the connector size of which is approx. 26mm. Your hose should therefore fit.

Yes, the coupling is made of stainless steel and ABS quality. It is designed to withstand extreme weather conditions and is therefore durable.

This quick coupling is specifically designed for 1/2 inch garden hoses. For other hose sizes, we offer suitable solutions in our range.

No, the BONI-51-120 is made of stainless steel. This makes it very resistant to corrosion, even with constant water contact.

Yes, the water stop function of the connector ensures that the water supply is interrupted immediately as soon as you remove a connected device.