22mm Pipe Insulation Sleeve, 9mm Gray Foam Pipe Lagging

The insulation is resistant to aging, which also concerns the color stability. It is designed for permanent insulation in various environments and retains its appearance.

With a pipe circumference of 9 cm (90 mm), you need a pipe diameter of about 28.6 mm. Our insulation hose with an inner diameter of 28 mm is very suitable for this. (Roughly calculated: circumference 90mm divided by Pi gives approx. 28.6mm diameter).

The insulation prevents frost damage to water pipes thanks to its excellent thermal conductivity and optimal thermal insulation of 0.034 W/mK at 0 °C.

Yes, the insulation hose meets the requirements of the GEG and DIN 1988 200 and EN 806-2. It is therefore in accordance with the standards for use in heating and sanitary areas.

The double-sided self-adhesive closure system is designed for uncomplicated handling. Therefore, the attachment should also be easy for older people.

The CLIMAFLEX® insulation hose is a CO2-neutral product throughout the entire manufacturing process and improves the ecological efficiency of your system. It also consists of at least 50% renewable raw materials.

Although the insulation hose has a proven, double-sided self-adhesive closure system, additional fixing with cable ties or special insulation tape is possible, but not mandatory.

Yes, the insulation hose is also suitable for cold water pipes according to DIN 1988 200. It prevents condensation and can be used for temperatures from 0°C to +100°C.

The closed-cell structure of the insulation material effectively prevents moisture absorption and condensation. This reliably protects against mold and corrosion damage, even in more humid environments.

The CLIMAFLEX® is a CO2 neutral product throughout the entire manufacturing process. It consists of foamed polyethylene with at least 50% renewable raw materials, which improves the ecological efficiency of the system.

Yes, the insulation is flexible and adapts well. This flexibility also makes installation easier on uneven surfaces or curves.

The roll should be stored away from sunlight. The product description does not provide specific information on UV resistance for permanent use outdoors.

The insulation is specifically intended for heating, hot water and cooling systems and is not explicitly designated for waste water pipes. One roll of the AEROFLEX® SH XT has a length of 2 meters.

The black design of the pipe insulation was deliberately chosen to reduce visual disturbances. It offers an unobtrusive and professional look for various environments.

Each roll of AEROFLEX® SH XT pipe insulation has a length of 2 meters. The product is only available in black.

No, the pipe insulation is self-adhesive on the back and adheres firmly to metallic surfaces. If necessary, you can additionally secure the longitudinal sides with adhesive tape to ensure optimal tightness.

The AEROFLEX® SH XT insulation has a temperature resistance that is designed for typical pipe applications of heating systems. The closed-cell foam based on rubber is robust and resistant.

Yes, the AEROFLEX® SH XT pipe insulation is ideal for insulating heating and air conditioning pipes. It efficiently protects both heating and cooling systems.

The pipe insulation is resistant to aging and is designed for a long service life. It provides permanent insulation in various environments.

Yes, the SH XT is suitable for hot water pipes and provides permanent insulation. Its durability and resistance to aging make it ideal for such installations.

The SH XT is designed for durability and is characterized by its resistance to aging. It offers permanent insulation, so a quick replacement is not necessary.

The flexibility of the material makes it easy to handle during installation. A sharp knife is recommended for cutting, which also allows laymen to make precise adjustments.

Yes, the AEROFLEX® SH XT is suitable for insulating cooling systems. Its closed-cell structure minimizes heat transfer and effectively prevents condensation.

One roll of AEROFLEX® SH XT is 2 meters long. If you want to insulate 10 meters of pipe, for example, you would need 5 rolls. (Roughly: Each roll covers 2 m.)

Yes, the closed cell structure of the AEROFLEX® SH XT minimizes heat transfer and effectively prevents condensation. This is ideal for cold water or cooling systems.

Yes, the insulation is flexible and adapts well. The elasticity of the rubber base allows installation even on uneven surfaces for seamless insulation.

The AEROFLEX® SH XT insulation has a cross-section of 54 x 10 mm. It therefore fits ideally for pipes with an outer diameter of up to approx. 34 mm. (Roughly calculated: 54mm outer diameter of the insulation minus 2x 10mm wall thickness gives the maximum pipe diameter.)

Yes, the AEROFLEX® SH XT is designed for typical pipe applications. It is resistant to aging and moisture, which supports outdoor use and ensures a long service life.

The SH XT is designed for easy and efficient assembly. Thanks to the self-adhesive layer and flexibility, you can quickly apply the insulation even without special knowledge.

The self-adhesive layer is designed to adhere firmly and enable tool-free installation. Additional securing is only recommended for overlapping longitudinal sides for optimal sealing.