2 Inch Galvanized Steel Pipe Nipple, Threaded Fitting

Yes, the pipe nipple is suitable for use with hot liquids and withstands operating temperatures of up to 180°C. Ensure a temperature-resistant thread seal.

Yes, the nipple is safe for an operating pressure of 15 bar. The maximum operating pressure of the fitting is 20 bar.

Yes, the threaded fitting can also be used in refrigeration and air conditioning systems. The temperature resistance up to 180°C means that even very low temperatures are not a problem.

Yes, the pipe nipple is specifically designed for use in industrial plant construction. It withstands pressures up to 20 bar and temperatures up to 180°C.

Yes, with a total length of 100 mm (10 cm) the nipple is suitable. Note that the threads at both ends take up about 10 mm in length, so the effective bridging length is around 80 mm.

The pipe nipple is galvanized, providing good corrosion protection. For permanent outdoor use, the threaded connections should be additionally protected to maximize longevity.

Yes, this pipe nipple has 3/8" external threads on both sides and is designed specifically to connect two internal threads. Remember to seal with Teflon tape or hemp.

Yes, the nipple has a 3/8" external thread (AG) on both sides and thus fits into a corresponding 3/8" internal thread.

Yes, pipe nipples of this kind are used among other things in sprinkler systems. Pay attention to proper sealing and the pressure resistance of the entire irrigation system.

Yes, the galvanized pipe nipple is designed for a maximum operating pressure of 20 bar. This allows for use in various high-pressure applications.

Yes, the nipple is designed for use in refrigeration and air conditioning systems. The steel material and galvanization are suitable for such applications, even at temperatures below 0°C.

Yes, the pipe nipple can be used in refrigeration and air conditioning systems. It is designed for a maximum operating pressure of 20 bar and withstands temperatures up to 180°C.

Yes, the galvanization protects the nipple from corrosion, allowing for use in outdoor areas such as sprinkler systems. However, prolonged extreme weather conditions stress the material more.

Yes, the pipe nipple is specifically designed for gas installations as well as for transporting liquids. Proper sealing of the threads is particularly important.

The galvanized steel pipe nipple is generally suitable for conveying liquids. For drinking water installations, however, you should always check national and local regulations and material approvals.

Yes, the galvanized pipe nipple is suitable for such demanding applications. It is designed for operating temperatures up to 180°C and a maximum operating pressure of 20 bar.

Yes, the pipe nipple can be used to extend or connect water pipes. It is suitable for liquids; ensure the thread sealing is done correctly.

Yes, the galvanized steel provides good corrosion protection for outdoor use over the summer. The threaded fitting is suitable for pressures up to 20 bar and is thus adequately sized for sprinkler systems.

Yes, this pipe nipple is ideal for connecting two components with 3/8" internal thread (IG), as it has 3/8" external thread (AG) on both sides.

The galvanization of the steel pipe nipple provides good corrosion protection for typical applications in mechanical engineering. For very aggressive environments, suitability should be checked individually.

The pipe nipple is designed for temperatures up to 180°C and is thus suitable for use in heating systems.

No, the threaded connections are not self-sealing. They must be sealed with a suitable thread sealant material such as PTFE tape or hemp.

The galvanized steel material of the nipple is suitable for use with liquids. For outdoor use, the connection should be well sealed and protected from direct weather.

Yes, the pipe nipple is explicitly designed for heating installations and offers high resistance. The surface is galvanized for durability in the heating circuit.

The galvanized nipple is generally suitable for drinking water pipes, provided that regional standards and regulations allow this. The threads must be professionally provided with sealing material.

Yes, the pipe nipple is suitable for hot water as it can withstand a maximum operating temperature of 180°C. The galvanization also protects against corrosion.

The threads are robust and standardized, designed for frequent screwing on and off within the scope of normal maintenance. Teflon tape or hemp are suitable for sealing, which are not included in the scope of delivery.

Yes, the 400mm nipple is suitable for heating installations. It is designed for operating temperatures up to 180°C and can withstand a pressure of up to 20 bar.

Yes, the nipple is also suitable for oil lines. Its construction and material properties allow its use for various liquids and gases.

Yes, the pipe nipple is expressly intended for sprinkler and gas extinguishing systems. It meets the requirements for such systems.