2 Inch Threaded Pipe Plug, Malleable Iron, Galvanized

Yes, the temper cast plug has DVGW approval and is suitable for gas installations. Ensure proper sealing of the thread with Teflon tape or hemp.

The plug is designed for temperatures from -20°C to 120°C at a maximum operating pressure of 25 bar. It is therefore perfectly suitable for 100°C hot water.

The threaded connections of this fitting are not self-sealing. Sealing with e.g. Teflon tape or hemp is absolutely necessary for reliable tightness.

The malleable cast iron plug is designed for pressures up to 25 bar (at temperatures up to 120°C). It is suitable for use in industrial plant construction and mechanical engineering.

The fitting is designed for a maximum operating pressure of 25 bar at temperatures up to 120°C. For safe sealing, the use of PTFE thread seal tape or thread seal hemp is mandatory.

Yes, the temper cast plug can also be used at higher temperatures. Operation is possible up to 300°C at a reduced maximum operating pressure of 20 bar.

The tapered external thread requires suitable thread sealing material such as PTFE thread sealing tape or sealing hemp. This is standard for Whitworth pipe threads.

Yes, the plug is DVGW-approved and complies with the UBA METALLE standard. It can therefore be safely used for drinking water installations.

The fitting is intended for use in refrigeration and air conditioning systems. It withstands operating temperatures up to -20°C without problems.

Yes, the temper cast plug is galvanized, making it corrosion-resistant. It can therefore be used outdoors without any problems.

Yes, due to the galvanization, the plug is well protected against corrosion. Use in humid environments is safe.

The BONI-42295-426 is operational up to -20°C. However, ensure that water-carrying pipes are emptied or protected during frost to avoid damage from freezing water.

This plug has a 2-inch external thread (AG) and thus fits into a connection with a corresponding 2-inch internal thread (IG). Please check the thread type of your connection.

Yes, the plug is designed for use in industrial plant construction and withstands pressures up to 25 bar (up to 120°C) or 20 bar (up to 300°C).

The product description indicates the stopper is for pools, ponds, and industrial facilities. Explicit certification for drinking water applications is not mentioned.

Yes, the plug can be used in applications up to 300°C. It should be noted that the maximum permissible operating pressure at this temperature is 20 bar.

Yes, the stopper is stainless and corrosion-resistant, making it suitable for humid environments.

Yes, the tapered external threads (ISO 7-1/EN 10226-1) are designed for parallel internal threads. A secure seal is ensured with thread sealing material such as Teflon tape or hemp.

Yes, the PVC plug is designed for a pressure rating of PN10 (10 bar). A pressure of 8 bar is therefore easily possible.

During installation, the plug should be hand-tightened and, if necessary, carefully tightened further with a suitable tool. No specific orientation is required.

Yes, the plug is suitable for both permanent and temporary closure of PVC pipes. Installation is easy.

The PVC-U plug provides a secure and lasting seal. When properly installed, it remains reliably tight even with slight vibrations, as can occur at pump connections.

Yes, the PVC plug is designed for permanent closure of pipelines in pond systems. It provides a secure and tight solution.

The PVC plug offers high resistance to chemicals and can therefore also be used in wastewater pipes that come into contact with aggressive cleaners.

The plug is made of PVC-U, which has high resistance to various chemicals. This usually includes saltwater.

Yes, the PVC-U plug has high resistance to chemicals. The usual pond care products like algaecides and pH regulators are safe for the material.

Yes, the PVC-U plug is robust and UV-resistant, making it suitable for permanent outdoor use. It is also used in pool and pond installations.

The plug is designed for a pressure rating of PN10 (10 bar). This specification ensures that it also withstands moderate pressure fluctuations in irrigation systems and provides reliable sealing.

For optimal sealing of threaded connections, we recommend using additional PTFE sealing tape or a suitable thread sealant. The plug itself is precisely fitted.

Yes, this plug has a 2-inch external thread (AG) and thus fits a corresponding 2-inch internal thread (IG).