1/2 Inch Stainless Steel Pipe Nipple, 200mm V4A Fitting

Yes, the nipple is safe for an operating pressure of 15 bar. The maximum operating pressure of the fitting is 20 bar.

Yes, the threaded fitting can also be used in refrigeration and air conditioning systems. The temperature resistance up to 180°C means that even very low temperatures are not a problem.

The galvanized steel material of the nipple is suitable for use with liquids. For outdoor use, the connection should be well sealed and protected from direct weather.

Yes, the pipe nipple is explicitly designed for heating installations and offers high resistance. The surface is galvanized for durability in the heating circuit.

The galvanized nipple is generally suitable for drinking water pipes, provided that regional standards and regulations allow this. The threads must be professionally provided with sealing material.

Yes, the pipe nipple is suitable for hot water as it can withstand a maximum operating temperature of 180°C. The galvanization also protects against corrosion.

The threads are robust and standardized, designed for frequent screwing on and off within the scope of normal maintenance. Teflon tape or hemp are suitable for sealing, which are not included in the scope of delivery.

Yes, the 400mm nipple is suitable for heating installations. It is designed for operating temperatures up to 180°C and can withstand a pressure of up to 20 bar.

Yes, the nipple is also suitable for oil lines. Its construction and material properties allow its use for various liquids and gases.

Yes, the pipe nipple is expressly intended for sprinkler and gas extinguishing systems. It meets the requirements for such systems.

Yes, the threaded connections are not self-sealing. For a reliable seal, the use of thread sealing material such as PTFE thread sealing tape or thread sealing hemp is required.

Yes, the pipe section can be easily used in wastewater pipes. The steel material and galvanization are suitable for this.

Yes, the galvanized pipe nipple is intended for industrial plant construction and temperatures up to 180°C. Operation at 170°C is therefore safe.

Yes, the 400mm nipple serves as a pipe connection part and can be used as an extension for water pipes. The threaded connections must be carefully sealed.

Yes, the nipple is intended for mechanical engineering and can withstand a maximum operating pressure of 20 bar. It is therefore suitable for a compressed air network at 19 bar.

The pipe nipple is made of steel and is galvanized. The galvanization provides good corrosion protection, which protects the material from rust outdoors.

Yes, it is absolutely necessary to seal the threaded connections. The threads are not self-sealing and must be provided with a suitable thread sealing material such as PTFE tape or hemp.

Yes, the 400mm nipple can be used as a spacer for 35 cm. After screwing in the threads, about 35-37 cm of free length remains, which should fit your application.

Yes, the pipe nipple is designed for use in refrigeration and air conditioning systems. It is versatile and can be used in various industrial and plant areas.

Yes, the nipple can be shortened if necessary to achieve the desired length. However, please note that the cut surfaces should then be resealed to prevent corrosion.

Yes, this pipe nipple can be used for compressed air systems. The maximum operating pressure of 20 bar is sufficient for this.

Yes, the threaded connections are not self-sealing. For sealing, e.g. Teflon tape or hemp should be used.

No, the nipple can withstand a maximum operating pressure of 20 bar, but a pipe with 15 bar pressure should be handled with caution.

Yes, the pipe nipple is explicitly intended for the conveyance of gases. Pay attention to a professional sealing of the threads with suitable material such as hemp or PTFE tape.

Yes, the nipple can be used for heating systems. It withstands a maximum operating temperature of 180°C.

Yes, the nipple is galvanized and can be connected to a galvanized pipe fitting.

Yes, the nipple is suitable for refrigeration systems. It can conduct liquids and gases in various applications.

Yes, the nipple is suitable for sprinkler systems. It can conduct fluids in various applications.

Yes, the nipple can be used in industrial plants, but should be checked for chemical resistance.

This nipple has a 1 1/2" male thread (AG) on both sides. Make sure your faucet and pipe fitting have a corresponding 1 1/2" female thread (IG) to make a suitable connection.