1 Inch Suction and Discharge Hose Kit, 6 Meter with Brass Fittings

Yes, as the product name already suggests, the set is suitable for both suction and pressure applications. It offers optimal water transfer for your various needs.

The hose length is 6 meters, which is sufficient for many garden watering tasks. For larger areas beyond this radius, a longer set or an extension might be necessary.

The supplied brass fittings are designed for a secure and tight connection. With proper installation and careful handling, they withstand frequent removal and reattachment.

The 6m hose has a volume of about 2.9 liters when fully filled. To empty a 100-liter pond, you would need to empty the hose about 35 times per pump cycle or let the pump run for a correspondingly long time. (Approximately: about 100 liters / 2.9 liters per hose fill ≈ 35 fills).

The installation of the hose set is deliberately simple thanks to the included hose clamps and brass fittings. The set is designed to be ready for immediate use and save you time and effort.

Yes, the suction and pressure hose set is specifically designed for applications like pools and ponds. It is suitable for both suction and pressure purposes.

The product description mentions pools, ponds, agriculture, and industry as application areas. Specific suitability or certification for drinking water is not listed.

Yes, the hose has a diameter of 1 inch (25 mm) and is thus compatible. The included brass fittings ensure a secure connection.

Yes, the suction and pressure hose set is designed for versatile use in various areas, including industry. You can therefore also use the hose to transfer suitable liquids in your workshop.

Yes, the set comes complete with hose clamps and brass fittings. It is thus ready for immediate use for applications such as pond or pool emptying.

The hose is robust and durable. For a long lifespan, however, we recommend storing it dry and protected from frost to avoid material damage.

Yes, the set is versatile as a suction and pressure hose, also suitable for water transport in demanding areas such as industry or agriculture, allowing use with dirty water pumps.

The hose is robustly constructed and resilient to meet the demands in pools, ponds, agriculture, and industry. It also withstands being pulled over uneven terrain without immediate damage.

Thanks to its robust construction, the hose offers good resistance. It is designed to perform reliably even in demanding applications and is easy to handle.

The stainless steel hose clamps and brass components are designed for durability and corrosion resistance, so the set will last a summer outdoors. However, an occasional visual inspection of the connections, especially after the first use, is advisable.

The hose is made of plastic with a reinforcement spiral. This spiral is specifically designed to maintain the hose's shape and prevent collapse even under strong suction.

Yes, the hose is designed for a working pressure of 6 bar. This is sufficient for many applications in the pond and pool sector, agriculture, or irrigation technology.

The suction and pressure hose set is intended for use in the construction industry. The robust construction and included suction strainer make it suitable for applications with dirty water pumps.

The product description does not explicitly state frost resistance for the hose. The valve is temperature resistant up to 100°C, but we recommend not storing the hose permanently outside in frost.

Yes, the 9-meter length of the hose set provides flexible reach. The floating intake is specifically designed to always draw the cleanest water from the surface, regardless of the water level.

Yes, due to the robust, UV- and ozone-resistant material, the hose is also suitable for use with saltwater. This makes it ideal for pools and ponds.

Yes, the hose is very robust despite its flexibility. It has high abrasion resistance and is suitable for use as a drag hose.

The set is described as robust and abrasion-resistant, promising high durability even with frequent use. You can rely on a long lifespan, even when in contact with rougher surfaces like cobblestones.

The hose is designed for a working pressure of up to 6 bar. That is sufficient for most garden irrigation systems.

The suction basket is designed to retain coarse particles like small leaves or dirt. For very fine suspended matter, an additional filter on the pump may be useful.

The hose is designed for a working pressure of up to 6 bar. This is usually sufficient to efficiently operate most standard garden sprinklers. The actual performance also depends on your pump.

The quick couplings are designed for common systems. Therefore, it is likely that they are also compatible with your older garden pump.

Yes, the brass double nipple included in the set has a 1" external thread (AG) and fits directly onto most standard garden pumps with 1" internal thread (IG). The set is designed for easy installation.

The hose is light and flexible despite its robust construction. The inner sleeve with an embedded plastic reinforcement spiral ensures shape stability and prevents easy bending, even with frequent movement.

Yes, the set is designed for suction and pressure applications and draws water on its own. The included foot valve with spring also prevents water from running back and supports efficient operation.