1"/25mm Suction + Pressure Hose with 1" Male Hose Tail + 1" Female 2/3 Union 10m

Yes, despite the sturdy construction and the internal reinforcement spiral, the hose is light and flexible. This makes transport and general handling significantly easier.

The suction and pressure hose has high abrasion resistance and a sturdy construction with an embedded plastic reinforcement spiral. This protects it from mechanical stress in daily use, even when in contact with rough surfaces like concrete.

The brass connectors are precision-made and flat-sealing, allowing quick assembly without special tools. For securing the hose with stainless steel clamps, a screwdriver or hex key is required to ensure a secure and tight connection.

Yes, the hose is ozone-, chlorine-, and UV-resistant and is excellent for the pond and pool sector, including underground installation. Its resistance protects it long-term from the usual chemicals in pond water.

The hose is UV-, ozone-, and chlorine-resistant. For optimal longevity, however, we recommend storing it dry and protected from direct sunlight, especially over the winter.

The hose is designed for a working pressure of up to 6 bar. It is thus reliably suitable for pressure lines in the mentioned application areas.

The hose has an inner layer with an embedded plastic reinforcement spiral. This ensures it remains stable and does not collapse under suction stress.

Yes, the suction and pressure hose is excellent for the pool sector. It is chlorine-resistant and can be used without any problems to pump out residual water from pools.

The maximum geodetic suction height of the hose is between 7 and 7.50 m between the liquid surface and the pump inlet. If the pump is placed in the basement, this height could be exceeded (roughly calculated: 2nd floor approx. 6 m + basement approx. 2-3 m = total height 8-9 m, which would be too high).

The set includes a hose nipple with 1-inch external thread and a hose fitting with 1-inch internal thread. These are designed for standard 1-inch connections and fit accordingly.

Yes, the hose can be used for both above-ground and underground installation. Its high abrasion resistance and durability support this.

Yes, the complete set includes all necessary stainless steel hose clamps and a flat-sealing brass hose fitting 2/3. Thus, all components for a tight installation are included.

Yes, the hose is specifically designed for demanding applications such as a drag hose in manure distribution. It has high abrasion resistance that protects against mechanical stress.

The geodetic suction height of this hose is a maximum of 7 to 7.50 m. For your 7.5-meter-deep well, this may be at the upper limit, so optimal performance is not guaranteed. It is important not to exceed this suction height.

The stainless steel hose clamps and brass components are designed for durability and corrosion resistance, so the set will last a summer outdoors. However, an occasional visual inspection of the connections, especially after the first use, is advisable.

The hose is made of plastic with a reinforcement spiral. This spiral is specifically designed to maintain the hose's shape and prevent collapse even under strong suction.

Yes, the hose is designed for a working pressure of 6 bar. This is sufficient for many applications in the pond and pool sector, agriculture, or irrigation technology.

The suction and pressure hose set is intended for use in the construction industry. The robust construction and included suction strainer make it suitable for applications with dirty water pumps.

The product description does not explicitly state frost resistance for the hose. The valve is temperature resistant up to 100°C, but we recommend not storing the hose permanently outside in frost.

Yes, the 9-meter length of the hose set provides flexible reach. The floating intake is specifically designed to always draw the cleanest water from the surface, regardless of the water level.

Yes, due to the robust, UV- and ozone-resistant material, the hose is also suitable for use with saltwater. This makes it ideal for pools and ponds.

Yes, the hose is very robust despite its flexibility. It has high abrasion resistance and is suitable for use as a drag hose.

The set is described as robust and abrasion-resistant, promising high durability even with frequent use. You can rely on a long lifespan, even when in contact with rougher surfaces like cobblestones.

The hose is designed for a working pressure of up to 6 bar. That is sufficient for most garden irrigation systems.

The suction basket is designed to retain coarse particles like small leaves or dirt. For very fine suspended matter, an additional filter on the pump may be useful.

The hose is designed for a working pressure of up to 6 bar. This is usually sufficient to efficiently operate most standard garden sprinklers. The actual performance also depends on your pump.

The quick couplings are designed for common systems. Therefore, it is likely that they are also compatible with your older garden pump.

Yes, the brass double nipple included in the set has a 1" external thread (AG) and fits directly onto most standard garden pumps with 1" internal thread (IG). The set is designed for easy installation.

The hose is light and flexible despite its robust construction. The inner sleeve with an embedded plastic reinforcement spiral ensures shape stability and prevents easy bending, even with frequent movement.

Yes, the set is designed for suction and pressure applications and draws water on its own. The included foot valve with spring also prevents water from running back and supports efficient operation.