1 Inch Suction Hose Kit with Floating Intake, 9 Meter

Yes, the 9-meter length of the hose set provides flexible reach. The floating intake is specifically designed to always draw the cleanest water from the surface, regardless of the water level.

The set includes all necessary components for easy installation. The basic connections usually still need to be connected to the pump but are designed to be user-friendly.

The set has an inner diameter of 1 inch (25 mm) and is intended for pumps with a corresponding connection. Please check the connection diameter of your garden pump for compatibility.

The suction and pressure hose set BONI-42224-9 includes all necessary components for easy installation. Additional adapters are usually not required to connect it to a suitable garden pump.

The floating intake of the BONI-42224-9 is designed to always draw clean water from the surface. Even in wells, it can help avoid fine particles or pollen that accumulate at the top.

The suction and pressure hose is designed for a working pressure of 6 bar. Short pressure spikes within this range should be well handled by the robust material with reinforcement spiral.

The BONI-42224-9 is both a suction and pressure hose and is designed for a working pressure of 6 bar. This is sufficient to operate common sprinklers or other irrigation systems.

The set is designed for water intake from the surface using a floating intake to ensure clean water without sediments. If you lay the hose on the bottom, you lose this advantage and risk sucking in dirt.

The integrated floating intake ensures that the suction valve always remains just below the water surface. This way, even with fluctuating water levels, only water and no air is sucked in.

Yes, the hose in the set is made of robust plastic with a reinforcement spiral. This construction ensures that the BONI-42224-9 remains stable even under high vacuum and does not collapse.

With a hose length of 9 meters, you can cover a flexible distance. Whether this is sufficient for your specific scenario depends on the exact distance (roughly calculated: an action radius of about 9 meters around the pump).

The hose is made of plastic with a reinforcement coil, which gives it stability and good flexibility. It is robust enough to prevent quick bending and can be laid around curves.

The set with a length of 9 meters is versatile for ponds, wells, and other water sources. The floating intake is primarily designed for clean water intake from the surface.

The set includes a robust brass foot valve. It is designed for reliable operation, but with heavy contamination or larger particles, the seal may be compromised. Regular cleaning is recommended.

The stainless steel hose clamps and brass components are designed for durability and corrosion resistance, so the set will last a summer outdoors. However, an occasional visual inspection of the connections, especially after the first use, is advisable.

The hose is made of plastic with a reinforcement spiral. This spiral is specifically designed to maintain the hose's shape and prevent collapse even under strong suction.

Yes, the hose is designed for a working pressure of 6 bar. This is sufficient for many applications in the pond and pool sector, agriculture, or irrigation technology.

The suction and pressure hose set is intended for use in the construction industry. The robust construction and included suction strainer make it suitable for applications with dirty water pumps.

The product description does not explicitly state frost resistance for the hose. The valve is temperature resistant up to 100°C, but we recommend not storing the hose permanently outside in frost.

Yes, due to the robust, UV- and ozone-resistant material, the hose is also suitable for use with saltwater. This makes it ideal for pools and ponds.

Yes, the hose is very robust despite its flexibility. It has high abrasion resistance and is suitable for use as a drag hose.

The set is described as robust and abrasion-resistant, promising high durability even with frequent use. You can rely on a long lifespan, even when in contact with rougher surfaces like cobblestones.

The hose is designed for a working pressure of up to 6 bar. That is sufficient for most garden irrigation systems.

The suction basket is designed to retain coarse particles like small leaves or dirt. For very fine suspended matter, an additional filter on the pump may be useful.

The hose is designed for a working pressure of up to 6 bar. This is usually sufficient to efficiently operate most standard garden sprinklers. The actual performance also depends on your pump.

The quick couplings are designed for common systems. Therefore, it is likely that they are also compatible with your older garden pump.

Yes, the brass double nipple included in the set has a 1" external thread (AG) and fits directly onto most standard garden pumps with 1" internal thread (IG). The set is designed for easy installation.

The hose is light and flexible despite its robust construction. The inner sleeve with an embedded plastic reinforcement spiral ensures shape stability and prevents easy bending, even with frequent movement.

Yes, the set is designed for suction and pressure applications and draws water on its own. The included foot valve with spring also prevents water from running back and supports efficient operation.

Yes, the hose clamps are made of high-quality stainless steel (W4), which ensures high corrosion resistance. They are therefore also suitable for permanent use with pool water.