1 Inch Water Suction and Delivery Hose Kit with Floating Intake - 6 Meter

The floating intake of the hose set is specifically designed to draw in clean water and avoid sediments at the bottom. Even at a lower water level in the pool, the intake works reliably as long as there is sufficient water surface.

The floating intake of the set is specifically designed to avoid sucking up sediments. It draws water from the surface and is therefore also suitable for slightly muddy pond water.

The hose set is designed for a maximum working pressure of 6 bar. Please check the pressure of your high-performance pump to avoid damage.

Yes, the hose has a diameter of 1 inch and comes with a 1" AG double nipple. So it fits many common garden pumps with corresponding internal thread.

Yes, the set is well-suited for pond cleaning. The floating intake helps reduce the suction of algae from the bottom, while the water is taken from the top.

The floating intake is ideal for drawing clean water from the surface and avoiding the suction of sediment or floating leaves. It is well-suited for rain barrels.

Directly extending the 6-meter hose requires suitable couplings and may affect the pressure. Currently, this specific set is only available in the 6m version.

Yes, the set is designed as a suction and pressure hose. The PVC material with plastic spiral is reinforced to counteract collapse under vacuum and ensure shape stability.

The hose is designed for a maximum working pressure of 6 bar. It can therefore be used without problems with most common garden and pond pumps without being damaged.

Yes, the hose with a 1-inch (25mm) diameter allows for a high water flow. In combination with a suitable pump, the set is well-suited for pool-to-bed irrigation.

The set has a hose length of 6 meters. Whether this length is sufficient depends on the position of your pump and the size of your garden. If necessary, an extension may be required for larger gardens.

Yes, the suction and pressure hose set BONI-42224-6 is well suited for pool drainage. The floating intake ensures that clean water is drawn from the surface.

The 6-meter hose length provides good reach for most garden applications and allows flexible water extraction. With it, you can conveniently cover an area of about 10-12 meters in diameter from the pump location.

The material is PVC with a plastic spiral, which is robust. For maximum lifespan, however, we recommend protecting the set from direct strong sunlight when not in use.

The stainless steel hose clamps and brass components are designed for durability and corrosion resistance, so the set will last a summer outdoors. However, an occasional visual inspection of the connections, especially after the first use, is advisable.

The hose is made of plastic with a reinforcement spiral. This spiral is specifically designed to maintain the hose's shape and prevent collapse even under strong suction.

Yes, the hose is designed for a working pressure of 6 bar. This is sufficient for many applications in the pond and pool sector, agriculture, or irrigation technology.

The suction and pressure hose set is intended for use in the construction industry. The robust construction and included suction strainer make it suitable for applications with dirty water pumps.

The product description does not explicitly state frost resistance for the hose. The valve is temperature resistant up to 100°C, but we recommend not storing the hose permanently outside in frost.

Yes, the 9-meter length of the hose set provides flexible reach. The floating intake is specifically designed to always draw the cleanest water from the surface, regardless of the water level.

Yes, due to the robust, UV- and ozone-resistant material, the hose is also suitable for use with saltwater. This makes it ideal for pools and ponds.

Yes, the hose is very robust despite its flexibility. It has high abrasion resistance and is suitable for use as a drag hose.

The set is described as robust and abrasion-resistant, promising high durability even with frequent use. You can rely on a long lifespan, even when in contact with rougher surfaces like cobblestones.

The hose is designed for a working pressure of up to 6 bar. That is sufficient for most garden irrigation systems.

The suction basket is designed to retain coarse particles like small leaves or dirt. For very fine suspended matter, an additional filter on the pump may be useful.

The hose is designed for a working pressure of up to 6 bar. This is usually sufficient to efficiently operate most standard garden sprinklers. The actual performance also depends on your pump.

The quick couplings are designed for common systems. Therefore, it is likely that they are also compatible with your older garden pump.

Yes, the brass double nipple included in the set has a 1" external thread (AG) and fits directly onto most standard garden pumps with 1" internal thread (IG). The set is designed for easy installation.

The hose is light and flexible despite its robust construction. The inner sleeve with an embedded plastic reinforcement spiral ensures shape stability and prevents easy bending, even with frequent movement.

Yes, the set is designed for suction and pressure applications and draws water on its own. The included foot valve with spring also prevents water from running back and supports efficient operation.