1 Inch Suction and Discharge Hose Kit - 7m with Strainer and Check Valve

The set is described as durable and robust, made of PVC with a plastic spiral. It is designed for versatile and reliable applications.

The BONI-42223-7 is made of PVC with a plastic spiral. This spiral is specifically designed to give the hose stability and prevent collapse during suction. Thus, the shape is maintained even under vacuum.

The hose length of 7 meters allows flexible applications. For a suction height of 5 meters, you will have about 2 meters left above water.

Yes, the hose is designed for a working pressure of up to 6 bar. This allows for use with many common pumps.

Yes, this suction and pressure hose set has been specifically developed for use in pools and ponds. It enables efficient water transfer.

Yes, the set is versatile and suitable for pumping water out of basements or other containers using a pump. It is designed for a working pressure of up to 6 bar. The length of 7 meters offers good flexibility.

The suction-pressure hose is made of sturdy PVC with a plastic spiral, giving it stability. Despite this sturdiness, the hose is flexible enough to be rolled up and stored space-savingly after use. A slight curvature when rolling up is due to the material.

The set includes a suction basket with an integrated check valve. This valve prevents the water column from flowing back when the pump is not in operation.

The suction and pressure hose set offers a complete solution for the suction side, including a suction strainer and check valve. The hose itself has a diameter of 1 inch (25 mm) and is designed to connect to pumps with this standard size. Specific pump adapters or additional seals for direct pump connection are usually not included in the set.

The hose has a diameter of 1 inch, which is 25 mm. Please check if this connection fits your pump or adapters.

The set is robust and versatile, suitable for the construction industry as well. It is suitable for pumping water and other liquids.

The 7-meter-long hose with a 1-inch (25 mm) diameter holds about 3.4 liters of water. This is useful for the initial filling of the suction pipe.

Yes, the suction strainer with check valve should be fully submerged in the liquid to be pumped. Only then can the pump reliably suction and the line remain filled.

Yes, the set is suitable for efficient pumping of water and other liquids. Pay attention to the material compatibility of the PVC hose.

The stainless steel hose clamps and brass components are designed for durability and corrosion resistance, so the set will last a summer outdoors. However, an occasional visual inspection of the connections, especially after the first use, is advisable.

The hose is made of plastic with a reinforcement spiral. This spiral is specifically designed to maintain the hose's shape and prevent collapse even under strong suction.

Yes, the hose is designed for a working pressure of 6 bar. This is sufficient for many applications in the pond and pool sector, agriculture, or irrigation technology.

The suction and pressure hose set is intended for use in the construction industry. The robust construction and included suction strainer make it suitable for applications with dirty water pumps.

The product description does not explicitly state frost resistance for the hose. The valve is temperature resistant up to 100°C, but we recommend not storing the hose permanently outside in frost.

Yes, the 9-meter length of the hose set provides flexible reach. The floating intake is specifically designed to always draw the cleanest water from the surface, regardless of the water level.

Yes, due to the robust, UV- and ozone-resistant material, the hose is also suitable for use with saltwater. This makes it ideal for pools and ponds.

Yes, the hose is very robust despite its flexibility. It has high abrasion resistance and is suitable for use as a drag hose.

The set is described as robust and abrasion-resistant, promising high durability even with frequent use. You can rely on a long lifespan, even when in contact with rougher surfaces like cobblestones.

The hose is designed for a working pressure of up to 6 bar. That is sufficient for most garden irrigation systems.

The suction basket is designed to retain coarse particles like small leaves or dirt. For very fine suspended matter, an additional filter on the pump may be useful.

The hose is designed for a working pressure of up to 6 bar. This is usually sufficient to efficiently operate most standard garden sprinklers. The actual performance also depends on your pump.

The quick couplings are designed for common systems. Therefore, it is likely that they are also compatible with your older garden pump.

Yes, the brass double nipple included in the set has a 1" external thread (AG) and fits directly onto most standard garden pumps with 1" internal thread (IG). The set is designed for easy installation.

The hose is light and flexible despite its robust construction. The inner sleeve with an embedded plastic reinforcement spiral ensures shape stability and prevents easy bending, even with frequent movement.

Yes, the set is designed for suction and pressure applications and draws water on its own. The included foot valve with spring also prevents water from running back and supports efficient operation.