10m Pipe Insulation, 100mm, 4mm, Sound & Thermal Protection

The fire behavior of the insulation is classified according to Euroclass E (EN 13501-1). This means the material is flammable but has limited fire spread.

Yes, the pipe insulation not only protects against heat loss and noise but also effectively minimizes condensation formation on the pipes.

Yes, the insulation is made of closed-cell polyethylene foam and has a robust outer skin, making it resistant even in damp basement environments.

Yes, the pipe insulation reduces heat losses from wastewater pipes and thus indirectly contributes to lowering energy costs.

The insulation features an installation-friendly inner sliding film that allows for easy and quick installation. Sliding it onto the pipe is thus facilitated.

The insulation is designed for pipes with a diameter of 100 mm. For 75 mm pipes, it would be too large, which would affect the insulation performance and fit.

Yes, the insulation hose is made of closed-cell soft polyethylene foam and is very flexible. The installation-friendly inner sliding film significantly facilitates laying even in hard-to-reach places.

Yes, one carton contains 10 meters of pipe insulation in loop form. This should be sufficient for your 8 meters of wastewater pipe, with reserve for cutting. (Approximately: this corresponds to about 1.25 pipe lengths of 8m).

Yes, the insulation reduces the noise level from wastewater pipes by up to 20 dB(A) and is thus noticeably effective. It also effectively protects against heat loss and prevents condensation.

Yes, the CLIMAFLEX® silence insulation is specifically designed for the body sound insulation of plastic pipes (HT) and cast iron pipes (SML).

The pipe insulation is made of high-quality, closed-cell polyethylene foam and is designed for a long lifespan. It reliably retains its excellent insulation and soundproofing properties.

The CLIMAFLEX® silence is designed for wastewater pipes with a diameter of 100 mm. For optimal soundproofing and maximum insulation effect, a precise fit is important.

Yes, this pipe insulation was specifically developed for soundproofing wastewater pipes. It reduces the noise level by up to 20 dB(A), thus increasing living comfort.

The product is designed for a temperature range of up to +95 °C. It can therefore also be used for hot water that does not exceed this temperature range.

The insulation meets Euroclass E (EN 13501-1) for fire behavior. This provides information on behavior in the event of a fire, but does not replace a comprehensive fire protection assessment of the installation.

The insulation is suitable for HT pipes and is intended for pipes with a maximum outer diameter of 70 mm at a width of 70 mm. A 50 mm pipe fits, but there will be an air gap.

The insulation hose is designed for pipes with a diameter of 70 mm. For smaller pipe diameters, the material would not fit snugly and may require additional fixing or adjustment to achieve full insulation effectiveness.

Yes, Climaflex silence is specifically designed for sound insulation of drain pipes like those of a toilet. It reduces the sound pressure level by up to 20 dB(A) and can thus significantly reduce perceived noise.

Yes, the flexible polyethylene foam can easily be cut to the desired length with a suitable knife or scissors. This is possible thanks to the material.

With a 10-meter length, you have a whole roll available. This is usually sufficient to fully insulate the drain pipes for a sink and dishwasher. (Roughly: for a standard washing set, you rarely need more than 3-5m).

Yes, the insulation is made of closed-cell polyethylene foam and has a robust outer skin. This makes it resistant to moisture.

Yes, the insulation sleeve made of soft polyethylene foam is very flexible. Its construction allows easy adaptation to bends and user-friendly installation.

Yes, the insulation effectively protects your pipes from heat loss and is designed for a temperature range up to +95 °C. The 4 mm insulation thickness contributes to energy savings.

The Climaflex silence insulation hose is delivered as a closed hose. For retrofitting on already laid pipes, manual cutting of the hose is necessary.

Yes, Climaflex silence is specifically designed for sound insulation of cast iron pipes (SML). The insulation significantly reduces noise from drainage pipes.

The insulation is equipped with an installation-friendly inner sliding film. This makes it particularly easy to slide onto the pipes without much effort.

Climaflex silence is primarily designed for structural noise insulation of cast iron and plastic pipes and reduces the sound pressure level by up to 20 dB(A). Thanks to the closed-cell polyethylene, it also provides some protection against heat loss at temperatures up to +95 °C.