22mm Pipe Insulation, 2m Heating Pipe Insulation

Each pack of CLIMAFLEX® contains two 1-meter pieces, so a total of 2 meters of insulation hose. For 7 meters of pipe you need 4 packs, as this gives 8 meters of insulation. (Roughly: one pack per 2 meters of pipe).

Yes, the CLIMAFLEX® insulation hose is designed for heating pipes and can reduce energy losses by up to 80%. This leads to a noticeable reduction in your heating costs.

The self-adhesive closure of the CLIMAFLEX® XT is designed for permanent and quick assembly. Re-detaching and re-attaching is not intended and can significantly impair the adhesive performance. Plan the length exactly before gluing.

Absolutely. The professional thermal insulation of the CLIMAFLEX® significantly reduces the heat loss of your heating pipes. This also leads to an energy saving of up to 80% in unheated basements.

Yes, the hose is suitable for cold water pipes according to DIN 1988 200.

Yes, the fire protection class is also relevant for pipes running in the wall for building safety. The CLIMAFLEX XT meets a high fire protection requirement with BLs1d0.

Yes, the insulation hose can also be attached to slightly corroded pipes, as long as the surface is still stable and has no sharp edges. The closed-cell structure does not affect the function.

The insulation is resistant to aging, which also concerns the color stability. It is designed for permanent insulation in various environments and retains its appearance.

With a pipe circumference of 9 cm (90 mm), you need a pipe diameter of about 28.6 mm. Our insulation hose with an inner diameter of 28 mm is very suitable for this. (Roughly calculated: circumference 90mm divided by Pi gives approx. 28.6mm diameter).

The insulation prevents frost damage to water pipes thanks to its excellent thermal conductivity and optimal thermal insulation of 0.034 W/mK at 0 °C.

Yes, the insulation hose meets the requirements of the GEG and DIN 1988 200 and EN 806-2. It is therefore in accordance with the standards for use in heating and sanitary areas.

The double-sided self-adhesive closure system is designed for uncomplicated handling. Therefore, the attachment should also be easy for older people.

The CLIMAFLEX® insulation hose is a CO2-neutral product throughout the entire manufacturing process and improves the ecological efficiency of your system. It also consists of at least 50% renewable raw materials.

Although the insulation hose has a proven, double-sided self-adhesive closure system, additional fixing with cable ties or special insulation tape is possible, but not mandatory.

Yes, the insulation hose is also suitable for cold water pipes according to DIN 1988 200. It prevents condensation and can be used for temperatures from 0°C to +100°C.

The CLIMAFLEX® is primarily designed for heating and sanitary areas as well as cold water pipes according to DIN 1988 200. It is usually not used for wastewater pipes.

The pipe insulation is designed for a temperature range of up to +110 °C. It is not suitable for higher peak temperatures, such as those that can occur in solar thermal systems.

The closed-cell structure of the insulation material effectively prevents moisture absorption and condensation. This reliably protects against mold and corrosion damage, even in more humid environments.

The CLIMAFLEX® is a CO2 neutral product throughout the entire manufacturing process. It consists of foamed polyethylene with at least 50% renewable raw materials, which improves the ecological efficiency of the system.

Yes, CLIMAFLEX® is a flexible insulation material that adapts well to bends. Thanks to the closed-cell polyethylene, it is also resistant to moisture and condensation.

The insulation hose is delivered in 2 x 1m rods for shipping reasons. For 8 meters of pipe you need 8 individual 1m pieces, which corresponds to 4 packs of the product.

The insulation is primarily intended for heating and sanitary areas indoors. Prolonged direct UV exposure outdoors is not recommended.

For insulation thicknesses of 5, 9 and 13mm, the material has fire behavior class BLs1d0. This is a very good classification for fire protection.

Yes, the insulation hose offers sound-absorbing insulation. This ensures improved acoustic comfort in the area of use.

Yes, the insulation is suitable for cold water pipes according to DIN 1988 200. The closed-cell polyethylene reliably prevents the formation of condensation.

Yes, the insulation meets both the requirements of the GEG (Building Energy Act) and the DIN standards for heating and sanitary applications.

CLIMAFLEX® naturefoam enables professional thermal insulation for energy savings of up to 80%. This noticeably improves the efficiency of your system.

Yes, that is possible without any problems. The insulation hose is designed for a temperature range of 0°C to +100°C.

Yes, the insulation hose is designed for a temperature range of 0°C to +100°C. Permanent use at 90°C is therefore possible without any problems.

The CLIMAFLEX® naturefoam is designed for a temperature range up to +100°C. So it can also be used for very hot pipes.